Physico-Chemical and Fuel Performance Assessment of Biodiesel Produced from Hevea Brasiliensis Rubber Seed Oil via Catalytic Transesterification
Keywords:
Hevea brasiliensis, Rubber seed oil, biodiesel, Transesterification, Fuel Characterization, Renewable Energy, Non-edible feedstockAbstract
: The escalating global energy crisis and environmental degradation necessitate sustainable alternatives to petroleum-based fuels. This study investigates the comprehensive characterization and performance evaluation of biodiesel produced from Hevea brasiliensis (rubber) seed oil through catalytic transesterification. Rubber seeds were collected, dried, and mechanically processed, followed by solvent extraction using n-hexane in a Soxhlet apparatus. The extracted oil exhibited physicochemical properties including specific gravity of 0.804 g/cm³, density of 0.8201 g/cm³, acid value of 39.30 mg KOH/g, free fatty acid content of 19.65%, peroxide value of 33.84 meq/kg, saponification value of 171.91 mg KOH/g, and iodine value of 131.42 g I₂/100g. Biodiesel production was achieved through base-catalyzed transesterification using ethanol as the alcohol donor and potassium hydroxide as the catalyst, yielding 90% conversion efficiency. The produced biodiesel demonstrated favorable fuel quality parameters: flash point of 110°C, cloud point of 4°C, pour point of 1°C, kinematic viscosity of 4.32 mm²/s, density of 915.56 kg/m³, and calculated cetane number of 93.33. Comparative analysis with ASTM D6751 biodiesel standards and ASTM D975 diesel specifications revealed that the rubber seed oil biodiesel meets most critical fuel quality requirements, with superior flash point characteristics ensuring enhanced safety during storage and handling. The elevated acid value (89.76 mg KOH/g) and free fatty acid content (44.88%) suggest the necessity for pre-treatment optimization to minimize catalyst consumption and soap formation during transesterification. The study demonstrates that H. brasiliensis seed oil represents a viable non-edible feedstock for sustainable biodiesel production, offering advantages in terms of availability, renewability, and compatibility with existing diesel engine infrastructure. The findings contribute to the expanding knowledge base on alternative fuel sources and support the transition toward energy independence and environmental sustainability in tropical regions where rubber cultivation is prevalent.
Downloads
Published
Issue
Section
License
Authors retain copyright and grant the journal the right of first publication. Articles published in this journal are licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), permitting unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite
Most read articles by the same author(s)
- Dahiru Mohammed, Buhari Labaran, Agada Emmanuel Obotu, Olumuyiwa Oyekunle Akintola, Abubakar Habib Idris, Muhammad Mukhtar, Yasser Sabo Takko, Hannatu Akanang, Warji Muhammad Ibrahim, Jamila Ibrahim Shekarau, Hafsat Abubakar Garba, John Dedah , Musa Muhammad, Green and Efficient Pretreatment of Lignocellulosic Biomass for Bioethanol Production Using Deep Eutectic Solvent Synthesized from Choline Chloride, Zinc and Urea , Applied Science, Computing, and Energy: Vol. 4 No. 3 (2026): Volume 4, Issue 3
Similar Articles
- Paschal Okiroro Iniaghe, From Fossil Fuels to Solar Power: Nigeria’s Renewable Energy Transition in the African Context , Applied Science, Computing, and Energy: Vol. 3 No. 3 (2025): Volume 3, Issue 3
- Nnabuk Eddy, Advancements and Challenges in Nuclear Energy: Pathways for a Sustainable Future , Applied Science, Computing, and Energy: Vol. 1 No. 1 (2024): VOLUME 1 ISSUE 1
- Benjamin Odey Omang, Ukam Ngwu Ngwu, Temple Okah Arikpo, Uche Chukwura-Osoagba, Godwin Terwase Kave, Bassey Edem Ephriam, A comparative assessment of Lepidolite-bearing pegmatites from Akpet and Betem areas, Southeastern Nigeria: insights from their geochemical signatures and economic potential , Applied Science, Computing, and Energy: Vol. 3 No. 1 (2025): VOLUME 3 ISSUE 1
- Babatunde Temitope Ogunyemi, Ricard Alexis Ukpe, Renewable Energy Systems and Sustainable Technology Innovation , Applied Science, Computing, and Energy: Vol. 3 No. 3 (2025): Volume 3, Issue 3
- Samuel Awolumate, Buba B. Shani, Adekunle James Okhogbe, Energy–Water–Profit Trade-Offs and Scale Economies in Urban Aquaponics Under Electricity Unreliability: Comparative Evidence from Lagos and Abuja, Nigeria , Applied Science, Computing, and Energy: Vol. 4 No. 1 (2026): Volume 4 Issue 1
- Reuben Oluwabukunmi David, Job Obalowu, Tasi’u Musa, Yahaya Zakari, Beyond Normality: OGELAD Error Distribution in Energy Prices Volatility Forecasting , Applied Science, Computing, and Energy: Vol. 3 No. 1 (2025): VOLUME 3 ISSUE 1
- Richard Alexis Ukpe, Photochemical Smog and the Petroleum Industry: Sources, Mechanisms, Environmental Impacts, and Mitigation Strategies , Applied Science, Computing, and Energy: Vol. 3 No. 2 (2025): VOLUME 3 ISSUE 2
- Anas Muhammad Salisu, Joseph Istipanus Abaleni, Yusuf Aminu Ahmed, Nasiru Rabi’u, Jamilu Abdullahi Yusuf, Evaluation of Maximum Allowable Power Density and Thermal Limitations of Fuel Assembly of the Miniature Neutron Source Reactor as a Tool for Its Core Performance Measurements , Applied Science, Computing, and Energy: Vol. 4 No. 1 (2026): Volume 4 Issue 1
- Samira Sanni, A Review on Sustainable Procurement in the Age of AI: Leveraging Intelligent Systems to Advance U.S. Climate and Economic Resilience , Applied Science, Computing, and Energy: Vol. 3 No. 3 (2025): Volume 3, Issue 3
- Oyeniyi Richard Ajao, Kazeem Bamidele Ajanaku, Oladipupo Opeyemi Solaja, Arunprasath Muthuramalingam, Integrated Analysis of Mechanical Thinning and Thermal Subsidence in Engineering Materials and Systems , Applied Science, Computing, and Energy: Vol. 1 No. 1 (2024): VOLUME 1 ISSUE 1
You may also start an advanced similarity search for this article.